Xterra 2WD V6-4.0L (VQ40) (2005)
![background image](/nissan/xterra_2wd/v6-4.0l_(vq40)/Page-1490004.png)
CLAIMS INFORMATION
SERVICE PROCEDURE
1. Remove the ABS sensor, and position it out of the way.
^ See the BRC section of the applicable Electronic Service Manual for removal instructions.
2. Remove the rear brake rotor.
^ See the BR section of the applicable Electronic Service Manual for removal instructions.
3. Disconnect the parking brake cable from the parking brake assembly.
^ See the PB section of the applicable Electronic Service Manual for instructions.
4. Remove the four (4) axle shaft bearing cage nuts and lock washers.