Xterra 2WD V6-4.0L (VQ40DE) (2006)
![background image](/nissan/xterra_2wd/v6-4.0l_(vq40de)/Page-683002.png)
^
If the malfunctioning condition, when valve seating at ordinary room temperature, or measured values are out of the standard, replace water
inlet and thermostat assembly.
INSTALLATION
Installation is in the reverse order of removal, paying attention to the following.
^
Be careful not to spill engine coolant over engine room. Use rag to absorb engine coolant.
INSPECTION AFTER INSTALLATION
^
Check for leaks of engine coolant using tool.
^
Start and warm up engine. Visually check there are no leaks of engine coolant.