Nissan and Datsun Workshop Service and Repair Manuals

Connecting Rod Bearing: Specifications

IMPORTANT: Tighten nuts in two steps until specifications are reached.

Step 1: 14-16 Nm (10-12 ft. lbs.)
Step 2: 60° - 65° clockwise, or 38-44 Nm (28-33 ft. lbs.)

Standard Bearing Sizes

Undersized Bearing Sizes

Bearing Clearances

Standard  .................................................................................................................................................................  0.024-0.064 mm (0.0009-0.0025 in.)
Limit  .............................................................................................................................................................................................  0.090 mm (0.0035 in.)