Xterra SE 2WD V6-3.3L (VG33E) (2002)
Headliner: Service and Repair
Removal and Installation
1. Remove the front map lamps (if equipped).
2. Remove front and rear seats. Refer to "Removal and Installation".
3. Remove front and rear seat belts. Refer to "SEAT BELTS".
4. Remove the rear roof garnish trim.
5. Remove body side trim. Refer to "SIDE AND FLOOR TRIM".
6. Remove sun visors.
7. Remove assist grips.
8. Remove interior lamp assembly and luggage room lamp assembly.
9. Remove clips securing headlining.
10. Remove coat hooks.
11. Remove sunroof welt (if equipped).
12. Remove headlining.