Xterra SE 2WD V6-3.3L (VG33E) (2002)
Wheel Speed Sensor: Service and Repair
Sensor Rotor
Front Sensor Rotor
REMOVAL
1. Remove the front wheel hub.
2. Remove the sensor rotor using suitable puller, drift and bearing replacer.
INSTALLATION
Install the sensor rotor using suitable drift and press.
^
Always replace sensor rotor with new one.
^
Pay attention to the direction of front sensor rotor as shown in figure.
Rear Sensor Rotor (4WD)
REMOVAL
^
Remove the sensor rotor using tool.
INSTALLATION
Install the sensor rotor using suitable drift and press.
^
Always replace sensor rotor with new one.