Xterra SE 2WD V6-3.3L (VG33E) (2002)
3. Connect parking brake cable to toggle lever.
4. Install all parts.
Be careful not to damage wheel cylinder piston boots.
Parking Brake Cable To Toggle Lever
5. Check all parts are installed properly.
-
After installation is completed, adjust shoe-to-drum clearance.
Pay attention to direction of adjuster assembly.
6. Install brake drum.
7. When installing new wheel cylinder or overhauling wheel cylinder, bleed air.
8. Adjust parking brake.
-
Install all the parts by referring to to the figure.