Xterra SE 2WD V6-3.3L (VG33E) (2002)
Radiator: Service and Repair
Removal and Installation
Radiator, Radiator Shrouds, Radiator Drain Plug
REMOVAL AND INSTALLATION
1. Remove under cover.
2. Drain coolant from radiator drain plug.
3. Remove air duct. (From mass air flow sensor to throttle body)
4. Disconnect radiator upper and lower hoses.
5. Remove A/T oil cooler hoses. (A/T model only)
6. Remove radiator lower shroud.
7. Disconnect reservoir tank hose.
8. Remove radiator.
9. After repairing or replacing radiator, install any part removed in reverse order of removal.
10. Refill the engine cooling system.
After installation, run the engine until it reaches normal operating temperature and check for leaks.