Xterra SE 2WD V6-3.3L (VG33E) (2002)
Timing Belt: Removal and Replacement
Removal
CAUTION: Do not bend or twist timing belt.
After removing timing belt, do not turn crankshaft and camshaft separately because valves will strike piston heads.
Make sure that timing belt, camshaft sprocket, crankshaft sprocket and belt tensioner are clean and free from oil and water.
Installation should be carried out when engine is cold.
Timing Belt & Related Components
Removal
1. Remove engine under cover.
2. Drain engine coolant from radiator. Be careful not to spill coolant on drive belts. Remove radiator.
4. Remove engine cooling fan and water pump pulley.
5. Remove the following belts.
-
Power steering pump drive belt
-
Compressor drive belt
-
Alternator drive belt
-
Supercharger (if equipped).
6. Remove all spark plugs.
7. Remove distributor protector.