Xterra SE 2WD V6-3.3L (VG33E) (2002)
-
Always place air bag module with pad side facing upward.
-
Do not attempt to disassemble air bag module.
-
The special bolts are coated with a bonding agent. Do not use old bolts after removal; replace with new coated bolts.
-
Do not insert any foreign objects (screwdriver, etc.) into air bag module connector.
-
Do not drop or impact air bag module. If any portion is deformed or cracked, replace the module.
-
Do not expose the air bag module to temperatures exceeding 90 °C (194 °F).
-
Do not allow oil, grease or water to come in contact with the air bag module.
-
After air bag inflates, the instrument panel assembly should be replaced if damaged.
INSTALLATION
CAUTION: Always work from the side of an air bag module.