Xterra SE 4WD V6-3.3L (VG33E) (2000)
Vacuum Brake Booster: Testing and Inspection
OPERATING CHECK
1. Depress brake pedal several times with engine off. Alter exhausting vacuum, make sure there is no change in pedal stroke.
2. Depress brake pedal, then start engine. If pedal goes down slightly, operation is normal.
AIRTIGHT CHECK
Testing Brake Booster
1. Start engine, and stop it after one or two minutes. Depress brake pedal several times slowly. Booster is airtight if pedal stroke is less each time.
2. Depress brake pedal while engine is running, and stop engine with pedal depressed. The pedal stroke should not change after holding pedal down
for 30 seconds.