Xterra SE 4WD V6-3.3L (VG33E) (2000)
SLIDE-LOCKING TYPE
-
A new style slide-locking type connector is used on certain systems and components, especially those related to OBD.
-
The slide-locking type connectors help prevent incomplete locking and accidental looseness or disconnection.
-
The slide-locking type connectors are disconnected by pushing or pulling the slider. Refer to illustration below.
CAUTION:
-
Do not pull the harness or wires when disconnecting the connector.
-
Be careful not to damage the connector support bracket when disconnecting the connector.
Connector and Terminal Pin Kit
Use the connector and terminal pin kit listed when replacing connectors or terminals.
The connector and terminal pin kit contains some of the most commonly used NISSAN connectors and terminals.
How to Probe Connectors
Connector damage and an intermittent connection can result from improperly probing of the connector during circuit checks. The probe of a Digital
Multimeter (DMM) may not correctly fit the connector cavity. To correctly probe the connector, follow the procedures below using a "T" pin. For the