Xterra XE 4WD V6-3.3L SC (VG33ER) (2002)
8. Install the Cleaning Adapter (white color adapter) onto the Fuel Sending Unit Connectors until it clicks (locks) in place. See Figure 29.
CAUTION:
When performing the following steps:
^
Use suitable protective gloves, safety glasses, or face shield.
^
Use suitable covers to protect carpet, upholstery, etc.
9. Spray Brake Cleaner #999MP-AH001P through each Adapter Tube for about two seconds (see Figure 30).
^
You will need to insert the Adapter Tube into the Brake Cleaner spray can nozzle.
10. Remove and discard the Cleaning Adapter.
NOTE:
^
When you remove the Cleaning Adapter, one or both of the connector inserts may come out of the Adapter.
^
Make sure you remove the insert(s) from the Fuel Sending Unit connector(s).