Xterra XE 4WD V6-3.3L SC (VG33ER) (2002)
Do not align snap ring gap with spring retainer stopper.
5. Install drive plates, driven plates, retaining plate and dish plate.
6. Install snap ring.
7. Measure clearance between retaining plate and snap ring. If not within allowable limit, select proper retaining plate.
Specified clearance:
Standard..................0.5 - 0.8 mm (0.020 - 0.031 inch)
Allowable limit.........................1.2 mm (0.047 inch)
8. Check operation of reverse clutch.