Xterra XE 4WD V6-3.3L SC (VG33ER) (2002)
![background image](/nissan/xterra_xe_4wd/v6-3.3l_sc_(vg33er)/Page-1453023.png)
Wheel Bearing Race Removal
23.
Working on a hydraulic press, place the brake backing plate assembly on the "Hub Support" special tool # J-46215-2 (see Figure E20).
CAUTION:
Wear suitable eye and hand protection when using the hydraulic press.
24.
Take the old outer wheel bearing you previously removed, and:
^
Place it in the outer race
^
Then place the "Bearing Remover" special tool # J-46215-1 on the face of the old outer bearing (see Figure E21).