Achieva L4-144 2.4L DOHC VIN T SFI (1996)
Ignition Coil: Service and Repair
REMOVE OR DISCONNECT
1. Disconnect the negative battery cable.
2. Disconnect the electronic Ignition Control Module (ICM) 11 pin harness connector.
3. Remove the ignition coil and the electronic ignition control module assembly to cam housing bolts.
4. Remove the ignition coil and electronic ignition control module assembly from the engine.
5. Remove the housing to cover screws (7).
6. Remove the housing (6) from the cover (1).
7. Disconnect the coil harness connectors (4).
8. Remove the coil(s) (5), contact(s), and seal(s) from the cover (1).
INSTALL OR CONNECT
1. Install the coil(s) (5) to the cover (1).
2. Connect the coil harness connectors (4).
3. Install the seals to housing (replace with new seals).
4. Install the contacts to housing (use petroleum jelly to retain).
