Achieva L4-144 2.4L DOHC VIN T SFI (1996)
NOTE: Refer to the Latest Techline Information on Re-Programming or Flashing procedures.
1. Install the KS module in the KS module socket.
2. Install the KS module cover.
-
Tighten the KS module cover screws to 2.8-3.2 Nm (25-28 lb. in.).
3. Slide the PCM (3) into the PCM retainer.
4. Install the PCM mounting bolt (1).
-
Tighten PCM mounting bolt to 8-12 Nm (6-9 lb. ft.).
5. Connect the PCM electrical connectors (2).
6. Install the RH hush panel.
7. Connect the Negative battery cable.