oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Sensors and Switches - A/T > < A/T - 2-3 Upshift or 3-2 Downshift Clunk Noise
Page 1
background image

Parking Pawl: Service and Repair

REPLACE

1. Raise and support vehicle.
2. Remove transaxle oil pan.
3. Remove oil strainer and filter seal.
4. Remove fluid level indicator stop.
5. Remove rod retainer and parking lock bracket.
6. Remove clip, pin, rod and spring.
7. Reverse procedure to install.

Sensors and Switches - A/T > < A/T - 2-3 Upshift or 3-2 Downshift Clunk Noise