Achieva V6-3100 3.1L MFI VIN M (1994)
Alignment: Service and Repair
Front Wheel Alignment
Front Caster Adjustment
CASTER
Caster angle is not adjustable. If caster angle, Fig.1 , is not with in specifications, check suspension support for improper alignment and suspension
components for damage. Replace damaged components as necessary.
Front Camber Adjustment
CAMBER
Toe setting is the only adjustment normally required. However, in special circumstances, such as damage due to road hazard or collision, camber
angle, Fig.1 , may be adjusted by modifying strut assembly.
1. If strut is on vehicle, disconnect strut from steering knuckle. If strut is off vehicle, secure bottom of strut assembly in a suitable vise.
2. Enlarge bottom holes in outer flanges with a round file, until holes in outer flanges match slots in inner flanges, Fig.2 .
3. Install or connect strut to steering knuckle and install bolts finger tight.
4. Grasp top of tire firmly, then move tire inboard or outboard until correct camber reading is obtained. Tighten retaining bolts enough to secure
camber setting.
5. Remove wheel and tire assembly, if necessary, then torque strut to steering knuckle retaining bolts to 133 ft. lbs.
Front Toe Adjustment