Achieva V6-3300 3.3L (1992)
Wheel Cylinder: Service and Repair
Removal
For additonal information see Notes, Warnings and Hints. See: Fundamentals and Basics
Rear Brake Pipes And Hoses
-
Raise vehicle and support on jack stands.
-
Mark relationship of wheel to axle flange, then remove wheel and tire assembly.
-
Mark relationship of brake drum to axle flange.
-
Remove brake drum.
-
Clear dirt and foreign material around wheel cylinder inlet and pilot.
CAUTION: Do not pull metal line away from cylinder, as this may kink or bend line. Line will separate from cylinder when cylinder is moved away
from brake backing plate.
-
Remove inlet tube nut and line.
-
Plug opening in line to prevent fluid loss and contamination.