oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Bezel Replacement|Page 10952 > < Bezel Replacement|Page 10950
Page 5
background image

*

Power door lock switch connector, if equipped.

*

Power window switch connector, if equipped.

*

Power mirror switch connector, if equipped (left side only).

12. Gently disengage the front door trim retaining clips and remove the door trim panel from the door.

Installation Procedure

1. Install the front door trim panel to the door. Ensure that the retainers are locked into place.
2. Connect the rear deck release connector.
3. Install the rear deck release switch bezel. Press the bezel firmly into place.
4. Install the window regulator handle to the door.
5. Connect:

*

Power door lock switch connector, if equipped.

*

Power window switch connector, if equipped.

*

Power mirror switch connector, if equipped.

6. Install the front door switch bezel assembly to the front door trim panel.
7. Install the lower switch bezel trim panel.

Notice:  Refer to Fastener Notice in Service Precautions.

8. Install the lower switch bezel trim screws.

Tighten the lower switch bezel trim screws to 10 N.m (89 lb in).

9. Install the lower switch bezel trim screw access cover.

10. Install the door trim panel screw (1) through the hole in the front door warning reflector.

Tighten the door trim panel screw (1) to 10 N.m (89 lb in).

11. Install the front door warning reflector.
12. Connect the negative battery cable.

Trim Panel Replacement - Side Front Door

Bezel Replacement|Page 10952 > < Bezel Replacement|Page 10950