Alero L4-144 2.4L DOHC VIN T SFI (2000)
6.2. Tighten the front suspension crossmember bolts to 115 Nm (84 ft. lbs.) plus 120 degrees rotation.
6.3. Tighten the front suspension crossmember to body bolts to 110 Nm (81 ft. lbs.).
7. Raise the vehicle and support with jack stands. Refer to Vehicle Lifting.
8. Install the brake lines to the retainers on the crossmember (2).
9. Install the mounting bolts from the power steering gear. Refer to Power Steering Gear Replacement.
10. Install the right front brake line from the vehicle. Refer to Brake Hose Replacement - Front in Brakes and Traction Control.
11. Install the side transmission mount bracket bolts. Refer to Transmission Mount Replacement - Side in Transmission and Drivetrain.
12. Install the rear transmission mount bracket bolts. Refer to Transmission Mount Replacement - Rear in Transmission and Drivetrain.
13. Install the front transmission mount bracket bolts. Refer to Transmission Mount Replacement - Front in Transmission and Drivetrain.
14. Install the brake modulator assembly to the support bracket. Refer to Brake Modulator Assembly Replacement in Brakes and Traction Control.
15. Install the lower ball joints to the steering knuckles. Refer to Lower Ball Joint Replacement.
16. Connect the ABS sensor to the wheel speed sensor and frame. Refer to Wheel Speed Sensor Replacement - Front in Brakes and Traction Control.
17. Install the splash shields. Refer to Splash Shield Replacement - Wheelhouse.
18. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignments.
19. Remove the engine support fixture. Refer to Engine Support Fixture in Engine .
20. Bleed the brake system. Refer to Hydraulic Brake System Bleeding in Brakes and Traction Control.