Alero L4-144 2.4L DOHC VIN T SFI (2000)
4. Disconnect the brake pipes (1,2) from the proportioning valve (3).
5. Remove the brake modulator assembly. Refer to Brake Modulator Assembly Replacement.
Important: The proportioning valve gasket (3) between the proportioning valve and the hydraulic modulator assembly (4) must be replaced
whenever these components are separated.
6. Remove the brake proportioning valve (1) from the brake modulator assembly (4).
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
