Alero L4-144 2.4L DOHC VIN T SFI (2000)
8. Disconnect the master cylinder to proportioning valve brake pipes from the proportioning valve.
9. Remove the brake modulator assembly to bracket mounting nut.
10. Remove the brake modulator assembly.
Installation Procedure
1. Install the brake modulator assembly to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the brake modulator assembly to bracket mounting nut.
^
Tighten the brake modulator bracket mounting nut to 30 Nm (22 ft. lbs.).