Alero L4-144 2.4L DOHC VIN T SFI (2000)
Drive Belt: Service and Repair
Removal Procedure
^
Tools Required
-
J 37059 Accessory Drive Belt Tensioner Wrench
Caution: To avoid personal injury when rotating the accessory drive belt tensioner, use a tight fitting 13 mm wrench that is at least 46 cm
(18 inch) long.
Remove the accessory drive belt by rotating the tensioner using J 37059.
Installation Procedure
Caution: To avoid personal injury when rotating the accessory drive belt tensioner, use a tight fitting 13 mm wrench that is at least 46 cm
(18 inch) long.
Install the accessory drive belt by rotating the tensioner using J 37059.