Alero L4-144 2.4L DOHC VIN T SFI (2000)
Fuel Line Coupler: Service and Repair
Metal Collar
There are 2 types of quick connects used on the fuel pipes. The metal collar type requires the J 37088-A Fuel Line Separator for removal. The plastic
collar type does not use any special tools for removal. Refer to Quick Connect Fittings Service (Plastic Collar).
REMOVAL PROCEDURE
TOOLS REQUIRED
J 37088-A Fuel Line Disconnect Tool Set
IMPORTANT: Relieve the fuel system pressure before servicing any fuel system connection.
1. Slide the dust cover from the quick-connect fitting.
2. Grasp both sides of the fitting. Twist the female connector 1/4 turn in each direction in order to loosen any dirt within the fitting.
CAUTION: Wear safety glasses when using compressed air in order to prevent eye injury.
3. Blow any dirt out of the fitting using compressed air.