Alero L4-144 2.4L DOHC VIN T SFI (2000)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Jumper Harness Replacement- Rear
Removal Procedure
1. Raise and support the vehicle on a suitable hoist. Refer to Vehicle Lifting.
2. Disconnect the two rear wheel speed sensor electrical connectors from the rear wheel bearing and speed sensor assemblies.
3. Disconnect the rear wheel speed sensor harness electrical connector (3) from the body connector.
4. Remove the rear wheel speed sensor harness retainers.
5. Remove the rear wheel speed sensor harness (1) from the vehicle.
Installation Procedure