oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Rear Knuckle > < Front Steering Knuckle|Specifications
Page 1
background image

Front Steering Knuckle: Service and Repair

Removal Procedure 

1. Raise the vehicle on a hoist. Refer to Vehicle Lifting.
2. Remove the brake caliper. Refer to Brake Caliper Replacement - Front in Brakes and Traction Control.
3. Remove the wheel drive shaft. Refer to Wheel Drive Shafts Replacement in Transmission and Drivetrain.

4. Remove the bolts (6) and nuts (2) attaching the steering knuckle (3) to the strut (1).
5. Remove the steering knuckle from the vehicle.

Installation Procedure 

Notice:   Refer to Fastener Notice in Service Precautions.

1. Install the steering knuckle (3) into the strut flange and install the steering knuckle bolts (6) and nuts (2).Tighten the nuts (2) to 180 Nm (133 ft.

lbs.). 

2. Install the wheel drive shaft. Refer to Wheel Drive Shafts Replacement in Transmission and Drivetrain.
3. Install the brake caliper. Refer to Brake Caliper Replacement - Front in Brakes and Traction Control.
4. Check the front wheel alignment. Refer to Measuring Wheel Alignment (Front) or Measuring Wheel Alignment (Rear) in Wheel Alignment.

Rear Knuckle > < Front Steering Knuckle|Specifications