Alero L4-144 2.4L DOHC VIN T SFI (2000)
3. Install the transmission mount thru bolt.
Tighten
Tighten the thru bolt to 75 Nm (55 ft. lbs.).
4. Remove the jackstand and the wood block.
5. Lower the vehicle.
Transmission Mount Replacement - Rear
Removal Procedure
1. Remove the front suspension support. Refer to Front Suspension Crossmember Replacement (Automatic Transmission) in Steering and
Suspension.
2. Remove the rear transmission mount thru bolt.
3. Remove the mount bolt.