Alero L4-144 2.4L DOHC VIN T SFI (2000)
Clutch Pedal Assembly: Service and Repair
Removal Procedure
Important: Service the clutch pedal and bracket as an assembly.
1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Powertrain Management.
2. Remove the sound insulator from inside the vehicle. Refer to Insulator Replacement - IP (Right) or Insulator Replacement - IP (Left) in Instrument
Panel, Gauges and Warning Indicators.
3. Remove the clutch master cylinder pushrod from the clutch pedal.
4. Disconnect the clutch position switch.
5. Remove the clutch cruise control switch from the bracket.
6. Remove the instrument panel support beam.
7. Remove the instrument panel support beam bracket bolt.
8. Disconnect the cruise control switch.
9. Remove the clutch pedal and bracket mounting nuts.