Alero L4-144 2.4L DOHC VIN T SFI (2000)
1. Install the pulse circuit board and the cover onto the wiper motor with three screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
2. Install the wiper drive system module onto the vehicle with 3 screws.
Tighten
Tighten the screws to 10 N.m (88 lb in).
3. Connect the connector to the wiper motor.
4. Install the air inlet grille panel onto the vehicle.
5. Install the wiper arm assemblies onto the vehicle.
6. Operate the wipers, checking for proper operation.