Alero V6-3.4L VIN E (1999)
Rear Door Window Glass Weatherstrip: Service and Repair
Rear Door Window Belt Outer Sealing Strip Replacement
REMOVAL PROCEDURE
1. Lower the window.
2. Remove the rear door stationary window.
3. Pull up on the door outer belt sealing strip (1) in order to release the strip from the clips.
INSTALLATION PROCEDURE
1. Align the door outer belt sealing strip clips to the slots in the door. Push down until an audible snap is heard at each clip in order to engage the
door outer sealing strip (1).
2. Install the door outer belt sealing strip (1).
3. Install the rear door stationary window.