oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

All Technical Service Bulletins: > < Initial Inspection and Diagnostic Overview|Page 4061
Page 1
background image

Knock Sensor: Customer Interest
PROM - Intermittent Hesitation or Lack of Power on Accel

File In Section: 06 - Engine/propulsion System 

Bulletin No.: 99-06-04-050

Date: October, 1999

Subject:

TECHNICAL

Intermittent Hesitation or Lack of Power On Acceleration (Reprogram PCM)

Models:
1999 Oldsmobile Alero
1999 Pontiac Grand Am with 3.4 L Engine (VIN E - RPO LA1)

Condition

Some owners may comment about an intermittent hesitation or lack of power on acceleration. The malfunction indicator lamp (MIL) will not be
illuminated, and no codes will be stored. If ESC spark advance is monitored with a TECH II scan tool during the condition, a reduction in ESC spark
advance (typically 14-19 degrees) will be observed.

Cause

Condition may be caused by the knock sensor interpreting normal engine harmonics as combustion detonation.

Correction

A revised calibration has been released to correct this concern. Reprogram the PCM using the correct calibration listed below.

Parts Information

The calibrations listed are electronic calibrations and are NOT available from GMSPO. Calibrations will be available from Techline starting August
1999, on the TIS 2000 Disc 16 CD ROM or Techline Disc 16/17 CD ROM.

Warranty Information

For vehicles repaired under warranty, use:

Labor
Operation

Description

Labor Time

J6355

On Car Reprogramming Use published

labor operation
time

All Technical Service Bulletins: > < Initial Inspection and Diagnostic Overview|Page 4061