Alero V6-3.4L VIN E (1999)
Steering Gear: Service and Repair
Power Steering Gear Replacement
REMOVAL PROCEDURE
1. Raise the vehicle on a hoist.
2. Remove the tire and wheel assemblies.
3. Remove the stabilizer shaft links from the control arms.
4. Remove the tie rod ends from the steering knuckle.
5. Remove the intermediate shaft lower pinch bolt (1) from the power steering gear (2).
6. Support the rear of the support frame with jack stands.
7. Remove the stabilizer shaft.
8. Remove the power steering hoses from the from the power steering gear.
9. Remove the power steering gear bolts (2) from the frame (3).
10. Remove the power steering gear (1) through the left wheel opening.
INSTALLATION PROCEDURE