Aurora V6-214 3.5L VIN H SFI (2001)
Front Door Window Glass Weatherstrip: Service and Repair
Door Window Sealing Strip
Front Side Door Window Belt Inner Sealing Strip Replacement
Removal Procedure
1. Lower the window all the way down.
2. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement See: Front Door Panel/Service and Repair
3. Starting at one end of the window inner belt seal strip (1), pull upward to release the seal strip.
4. If further disassembly of the door is required, remove the auxiliary water deflector.
1. Gently remove folded portion of deflector from the door flange.
2. Lift deflector up and out of the door.
Installation Procedure
1. If the auxiliary water deflector was removed during disassembly, install the water deflector to the front door inner panel.
1. Insert the deflector through the belt line, inboard of the window.
2. Position the deflector against the mirror patch.
3. Fold the perforated portion of the deflector over the door flange.
4. Press to secure the water deflector to the door flange.