Aurora V6-214 3.5L VIN H SFI (2001)
Rear Door Striker: Adjustments
Door Lock Striker Adjustment
Caution: Striker alignment is crucial for proper operation of the door systems. Do not hit the striker with a hammer or force alignment in any other way.
Failure to properly adjust striker will result in excessive door efforts or extensive damage to door system operation which could result in personal injury.
1. Loosen the 2 mini-wedge striker fasteners (1).
2. Pull the striker outboard to the end of the adjustment travel.
3. Tighten the 2 striker fasteners so that the striker can still be moved.
4. Hold the outside door handle out and gently push the door flush against the body in order to locate the striker.
5. Slowly open the door.
Notice: Refer to Fastener Notice in Cautions and Notices.
6. Secure the striker assembly.
Tighten the striker fasteners to 28 Nm (21 lb ft).
7. After adjusting the striker, touch up any exposed or unpainted surfaces.