oldsmobile Workshop Repair Guides

Oldsmobile Workshop Service and Repair Manuals

Center Pillar Garnish Molding Replacement|Page 12649 > < Center Pillar Garnish Molding Replacement|Page 12647
Page 2
background image

1. Use the J 38778   Door Trim Pad Clip Remover to disengage the push-in retainers.
2. Remove the quarter upper trim from the vehicle.

Installation Procedure

1. Install the quarter upper trim to the vehicle and line up the retainers with the holes.
2. Push in on the quarter upper trim to engage the clips.

Rear Compartment Sill Trim Plate Replacement

Rear Compartment Sill Trim Plate Replacement

Removal Procedure

1. Remove the sill plate retainers (1, 2).
2. Pull upward on the sill plate (3) to release the spring clips and remove the sill plate from the vehicle.

Installation Procedure

Center Pillar Garnish Molding Replacement|Page 12649 > < Center Pillar Garnish Molding Replacement|Page 12647