Aurora V6-214 3.5L VIN H SFI (2001)
Door Module: Service and Repair
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Disconnect the electrical connectors.
3. Remove the door module fasteners.
4. Remove the door module.
INSTALLATION PROCEDURE
1. Install the door module.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fasteners.
Tighten
Tighten the fasteners to 7 N.m (62 lb in).
3. Install the electrical connectors.
4. Install the door trim panel.