Aurora V6-214 3.5L VIN H SFI (2001)
Notice: Refer to Fastener Notice in Service Precautions.
Important: The bolts retaining the condenser to the radiator end tanks are a special length and should be the ONLY bolts used upon reinstallation.
The use of longer bolts will damage the radiator end tanks.
3. Install the condenser mounting bolts.
^
Tighten the condenser mounting bolts to 13 Nm (115 inch lbs.).
4. Install the headlamps.
5. Install the upper radiator seal.
6. Push the lower transaxle oil cooler line into the radiator quick connect fitting, until a "click" is heard.
7. Tug gently on the cooler line to ensure proper retention.
8. Slide the plastic cap (1) over the quick connect joint.
