Aurora V6-214 3.5L VIN H SFI (2001)
Radiator Cooling Fan Motor: Service and Repair
Cooling Fan Replacement- Electric
-
Tools Required
-
J 41623-A Cooler Quick Connect Tool
Removal Procedure
Caution: Refer to Electric Coolant Fan Caution in Service Precautions.
Caution: To help avoid personal injury or damage to the vehicle, a bent, cracked, or damaged fan blade or housing should always be
replaced.
1. Disconnect the battery negative cable.
2. Remove the upper tie bar.
3. Disconnect the wiring harness electrical connectors from the cooling fan motors.
4. Remove the clips attaching the wiring harness to the fan shroud.
5. Remove the lower air deflector.
6. Remove the transaxle oil cooler line retaining bolt and clip from the fan shroud.
7. Lower the vehicle.
8. Slide the plastic cap off the upper quick connect joint.
9. Disconnect the upper transaxle oil cooler line from the radiator using the J41623-A