Aurora V6-214 3.5L VIN H SFI (2001)
Installation Procedure
1. Install the new thermostat housing gasket (1) to the thermostat housing.
2. Install the new thermostat into the thermostat housing.
3. Position the thermostat housing to the cylinder head.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the thermostat housing bolts.
^
Tighten the thermostat housing bolts to 9 Nm (80 inch lbs.).
5. Position the J 38185 to the clamps in order to connect the outlet radiator hose and outlet heater hose to the thermostat housing.
6. Fill the cooling system.