Aurora V6-214 3.5L VIN H SFI (2001)
2. Position the secondary timing chain tensioner between the camshafts.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the secondary timing chain tensioner bolts.
^
Tighten the secondary timing chain tensioner bolts to 12 Nm (106 inch lbs.).
4. Once mounted, compress the left secondary timing chain tensioner shoes with your hand.
5. Lock the left secondary timing chain tensioner by inserting a piece of wire (2) into the access hole in the side of the tensioner (1).
6. Slowly release the pressure from the left secondary timing chain tensioner shoes. The tensioner should remain compressed.
7. Install the left exhaust secondary camshaft timing sprocket.
Right
Secondary Camshaft Drive Chain Tensioner Replacement- Right
Removal Procedure