Aurora V6-214 3.5L VIN H SFI (2001)
Fuel Pressure Test Port: Service and Repair
FUEL PRESSURE CONNECTION VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
2. Remove the fuel pressure connection valve (2) using a standard valve core removal and installation tool.
INSTALLATION PROCEDURE
1. Install the fuel pressure connection valve assembly (2) using a standard valve core removal and installation tool.
2. Connect the negative battery cable.
3. Inspect for fuel leaks.
3.1. Turn the ignition switch ON for 2 seconds.
3.2. Turn the ignition switch OFF for 10 seconds.
3.3. Turn the ignition switch ON.
3.4. Inspect for fuel leaks.
4. Install the cap (1) on the fuel pressure connection valve.
5. Install the fuel injector sight shield.