Aurora V6-214 3.5L VIN H SFI (2001)
Tail Light Bulb: Service and Repair
TAILLAMP BULB REPLACEMENT
REMOVAL PROCEDURE
1. Open the rear compartment lid.
2. Remove the appropriate rear compartment side trim panel. Refer to Compartment Trim Panel Replacement - Rear in Trunk/Liftgate.
3. Remove the tail lamp housing assembly. Refer to Taillamp Replacement.
4. Remove the tail lamp socket from the tail lamp housing assembly (3) by turning counter clockwise 1/4 turn.
5. Remove the tail lamp bulb from the socket.
INSTALLATION PROCEDURE
1. Install the tail lamp bulb into the socket.
2. Install the tail lamp socket into the tail lamp housing assembly (3).
3. Turn the tail lamp socket clockwise 1/4 turn in order to secure the socket to the tail lamp housing assembly (3).
4. Install the tail lamp assembly (3) to the vehicle.
5. Install the rear compartment side trim panel. Refer to Compartment Trim Panel Replacement - Rear in Trunk/Liftgate.
6. Close the rear compartment lid.