Aurora V6-214 3.5L VIN H SFI (2001)
clearance.
-
Do not exceed 70 km/h (45 mph). Do not exceed the chain manufacturer's speed limit, if lower.
-
Drive in a restrained manner. Avoid large bumps, potholes, severe turns, and other maneuvers that cause the tires to bounce up and down.
-
Follow any other instructions from the chain manufacturer that do not disagree with the above.
Tread Wear Indicators
Tread Wear Indicators Description
The original equipment tires have tread wear indicators that show when you should replace the tires.
The location of these indicators are at 72 degree interval around the outer diameter of the tire. The indicators appear as a 6 mm (0.25 inch) wide band
when the tire tread depth becomes 1.6 mm (2/32 inch).
Metric Wheel Nuts and Bolts Description
Metric wheel/nuts and bolts are identified in the following way:
-
The wheel/nut has the word Metric stamped on the face.
-
The letter M is stamped on the end of the wheel bolt.
The thread sizes of metric wheel/nuts and the bolts are indicated by the following example: M12 x 1.5.
-
M = Metric
-
12 = Diameter in millimeters
-
1.5 = Millimeters per thread (gap between)