Aurora V6-214 3.5L VIN H SFI (2001)
4. Install the filter (3).
5. Install the lower O-ring (2).
6. Install the fuel pressure regulator (6) into the fuel rail.
7. Install the fuel pressure regulator retainer clip (1).
8. Connect the fuel pressure regulator vacuum line.
9. Connect the negative battery cable.
10. Inspect for fuel leaks.
10.1. Turn the ignition ON for 2 seconds.
10.2. Turn the ignition OFF for 10 seconds.
10.3. Turn the ignition ON.
10.4. Inspect for fuel leaks.
11. Install the fuel injector sight shield.