Aurora V6-214 3.5L VIN H SFI (2001)
![background image](/oldsmobile/aurora/v6-214_3.5l_vin_h_sfi/Page-1399001.png)
Throttle Body: Service and Repair
Throttle Body Assembly Replacement
REMOVAL PROCEDURE
NOTE: Do not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as damage to the
gasket surfaces and throttle body assembly may result.
Use care in cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as sharp tools may damage the gasket surfaces.
1. Turn OFF the ignition.
2. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine.
3. Drain the radiator coolant. Refer to Draining and Filling Cooling System (LX5) or Draining and Filling Cooling System (L47) in Cooling System.
4. Remove the air cleaner intake duct (3).