Aurora V6-214 3.5L VIN H SFI (2001)
1. Install the cruise control module (2) to the bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the module to bracket fasteners.
Tighten
Tighten the fasteners to 7.5 N.m (66 lb in).
3. Install the cruise control module and bracket assembly to the vehicle.
4. Install the module retaining fasteners (1, 3).
Tighten
Tighten the fasteners to 9 N.m (80 lb in).
5. Connect the electrical connector (2) to the cruise control module.
6. Install the cruise control cable. Refer to Cruise Control Cable Replacement (W/L47) or Cruise Control Cable Replacement (W/LX5).
7. Inspect the component operation.
"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID".
See: Application and ID/RPO Codes
