Aurora V6-214 3.5L VIN H SFI (2001)
![background image](/oldsmobile/aurora/v6-214_3.5l_vin_h_sfi/Page-135004.png)
5. Reconnect the air duct (3) to the throttle body (1), and tighten the band clamp (2) at the throttle body.
6. Reconnect the electrical connectors for the IAT sensor and the MAF sensor.
7. Install the strut brace.
8. Connect the negative battery cable.
9. If a new PCM is being installed, program the EEPROM. See: Testing and Inspection/Programming and Relearning