Aurora V6-214 3.5L VIN H SFI (2001)
Most P-metric tire sizes do not have exact corresponding alphanumeric tire sizes. Replacement tires should be of the same Tire Performance Criteria
(TPC) specification number including the same size, the same load range, and the same construction as those originally installed on the vehicle.
Consult a tire dealer if you must replace the P-metric tire with other sizes. Tire companies can best recommend the closest match of alphanumeric to
P-metric sizes within their own tire lines.
Tire Chain Usage
Tire Chain Usage Description
When you use tire chains, most current vehicles require the following chain types:
-
SAE Class S or 1100 Series, Type PL tire chains (1)
-
SAE Class U or 1200 Series, Type P tire chains (2)
-
1800 Series Lug Reinforced tire chains (3)
These chains are specially designed in order to limit the fly-off effect that occurs when the wheel rotates.
Manufacturers of tire chains have a specific chain size for each tire size. These ensure a proper fit when the chains are installed. Purchase the correct
chains for the tires on which the chains will be used. Do not use rubber adjusters to take up slack in chains that are loose due to incorrect size. Always
follow the chain manufacturer's installation instructions.
The use of chains may adversely affect handling. When using chains, remember the following information:
-
Ensure that the vehicle is designed for chain clearance.
-
Adjust the speed to road conditions.
-
Avoid sharp turns.
-
Avoid locked-wheel braking in order to prevent chain damage to the vehicle.
-
Install the chains as tightly as possible on the drive tires. Tighten the chains again after driving 0.4 - 0.8 km (0.25 - 0.5 ml.). Do not use chains on
the non-drive tires. These chains may contact and damage the vehicle. If you use chains on the non-drive tires, ensure that there is enough
