Aurora V6-214 3.5L VIN H SFI (2001)
Wiring Harness: Service and Repair
Wiring Harness Replacement
Removal Procedure
1. Remove the case side cover.
2. Use a small flat-bladed tool in order to remove the wiring harness from the solenoid valve(s) (315A, 315B, 322, 334 and/or 440), TFP manual
valve position switch (395) and/or the temperature sensor.
3. Remove the wiring harness (224).
4. Remove the clips retaining the solenoid(s).
Installation Procedure